SD-Link11b Manual
Troubleshooting
-30-
- Check the signal strength if it is weak move toward the AP.
6-2-6
It Takes a Long Time to Shutdown
Unplug the SD-Link11b from the HP iPAQh2215 and View sonic V37
after turn off the host device will pop-up the Windows again. Simi-
larly when the card is inserted while the system is off will pop-up
Windows. This is because SD-Link11b card in or out triggers the
system to wake up. If this happens, plug out the card and keep
switch off for a few times until the system is completely off.
Leaving the SD-Link11b card in the system will not shut down the
device (it is in hibernated condition).
6-2-7
SD-Link11b Does Not Operate After Returning
From the Stand-by or Sleeping Mode
This may happen when the driver is not functioning. Reinstall the
SD-Link11b driver again. If you have the same problem, please con-
tact C-guys.
6-3-1
Upgrading the SD-Link11b Driver
Upgrading the SD-Link11b Driver may be required in one of the fol-
lowing situations :
- You would like to use new features that have become available
for your SD-Link11b.
- You installed a newer version of the Client Manager tool.
- Your Client Manager “Card Diagnostics” reported a Driver/Firm-
ware mismatch.
6-3 Upgrading Tips
