SD-Link11b Manual
Troubleshooting
-28-
Table 6.2.1 LED Activity Table
6-2-2
Cannot Connect To Network
If your SD-Link11b seems to be working fine, but you are not able to
connect to the network, this error might be due to a configuration
mismatch.
For example if LED of your SD-Link11b lights, the problem is likely to
be caused by a configuration mismatch of :
- Network Name (The SD-Link11b Network Name is case-sensi-
tive).
- Encryption Key
Other causes may be :
- No driver loaded.
- Station not authorized to access network.
- SD-Link11b defect.
The most common cause is simple mistake. First check whether the
card is inserted properly or not. If the card is inserted properly, the
connection icon (antenna) should be displayed. If you see the icon,
Power LED
Description/Action
Continuous Red Standard operational mode
No action is required
Off
SD-Link11b power is not on, so it cannot transmit/receive
data. The SD-Link11b may not be connected properly.
Actions :
- Check SD-Link11b connection.
- Verify the device settings of the SD-Link11b to determine
the conflict with other devices. If so, change the settings
of either your SD-Link11b or the conflicting device to
resolve the problem.
- Verify the versions of the driver.
- Consult the SD-Link11b
website at: http://www.c-guys.com
to see if newer ver-
sions are available and if so, upgrade the driver.
