TL0 3.0 User's Manual
17
❾
CLEAR button
Press the button to clear the current programmed setting. Refer to "PRO-
GRAMMED PLAYBACK" on page 18 for details.
❿
REPEAT button
Press to repeatedly playback all the tracks on a disc. When repeat mode is on,
the display will show the repeat
indicator. Press again to cancel the repeat
mode.
Precaution on handling the remote control unit
▷
When operating the remote control, point it towards the remote sensor on the front
panel.
▷
Make sure nothing is blocking the front panel where the remote sensor is located.
▷
Avoid exposing the remote sensor on the front panel to direct sunlight or other light
sources, as such exposure can cause malfunction.
▷
The remote control unit may malfunction when its batteries are running low. Change
the batteries to new ones of the same type if this seems to be the case.
Battery Installation
Unscrew the battery compartment cover using a
Philips screwdriver, and remove the cover. Insert the
provided two AA batteries into the compartment. Make
sure that the batteries are inserted with their possitive
(+) and negative (-) poles positioned correctly, and
screw the cover back on.
Battery Replacement Period
If the distance at which the remote control unit can be
used to operate TL0 3.0 seems to be decreasing, replace both batteries with new ones.
Precaution on handling batteries
▷
Never use different types of batteries together. Both rechargeable and non-
rechargeable batteries can be used, but the two should not be used together.
▷
If you will not be using the remote control unit for an extended period of time (more
than a month), remove the batteries to prevent leakage.
▷
If the batteries leak, use a cloth to wipe away the liquid inside the battery
compartment and replace the batteries with new ones.
▷
Do not heat or disassemble batteries, and never dispose of old batteries by throwing
them in a fire. Dispose of batteries following laws in the local area.
