CD TRANSPORT TL3N
0
❶
Check the Playback Order for the Programmed Tracks
Press the CHECK button repeatedly to show the playback order for the
programmed tracks. The display changes to “- -” when you reach the next to
the last track in the program.
Pressing the CHECK button again here will display the first track in the
playback order.
NOTE: If you press the STOP
button, the display will jump back to the first
track in the programmed order.
❷
Adding Tracks to the Program
To add one track to the current program, press the STOP button and select
the track number with the numeric keys. The new track will be added to the
end of the current playback order. Repeat this process to add more tracks to
the program. Press the STOP button to complete the track-adding phase.
❸
Changing Tracks in the Program
To change one track in your programmed playback order, press the CHECK
button repeatedly until the track number in question is displayed, then select
a new track number. The new track will overwrite the existing track. Repeat
this process to change more tracks. Press the STOP
button to finish the
track-changing phase.
❹
Clearing Programmed Tracks
All tracks
: To clear the entire program, hold down the CLEAR button for
more than seconds.
One track
: To clear one track from the program, press the CHECK button
repeatedly until the track number in question is displayed, then press the
CLEAR button. Repeat this step (CHECK then CLEAR) to remove more
tracks from the program.
※
The entire program will be cleared automatically when you open the CD
Door or turn the power off.
Tips and Hints
❶
Should you ever open the CD Door without pressing the STOP button, do
not touch the stabilizer and the disc until the turntable has stopped spinning
completely. Touching them while they are still spinning may cause stress on
the spinning mechanism and lead to malfunction.
