TL3N User's Manual
19
❷
Select a track number by pressing the numeric keys on the remote control
unit. The selected track will be added to the program. For example: Press
key-5 to add the 5th track to the 1st playback order, then press key-3 to add
the 3rd track to the nd playback order. Repeat this process to program
additional tracks.
Note:
※
In case that a number beyond the last track number on a disc is selected
the last track may be added alternatively.
※
After the 1st playback track is added you can select an addition track by
pressing skip buttons as well. The selected track number blinks. Then press
the PROGRAM button to add the track to the program. In this way press
the PROG. button to add the track every after blinking a track number by
pressing skip buttons.
❸
Press the STOP button to complete the programming phase. The 1st
playback track number is displayed. If 3 tracks are programmed “FULL” is
displayed as well.
●
Playback in Program Mode
Press the PLAY/PAUSE
/
button while the “PRGM” indicator is shown
on the display to play the programmed tracks.
NOTE: To return to the normal playback mode, press the PROGRAM button
while playback is stopped. The “PRGM” indicator will disappear from the
display. *To return to the program mode, press the PROGRAM button again.
●
Checking, Adding, Changing and Clearing Programmed Tracks
You can check, add, change and clear the programmed tracks under the
program mode while playback is stopped.
