6
Analog output
XLR(Balanced)
Balanced analog output using standard XLR
terminals (1=GND, 2=Hot, 3=Cold). This should be the
preferred connection since DA SL has been designed
as a fully balanced circuit.
RCA(Unbalanced)
Standard RCA analog output terminals.
WORD CLOCK INPUT 44.1kHz
BNC
44.1kHz word clock input jack with a BNC connector.
Connect to an external clock generator using a BNC
(75
Ω
) cable. When the external word clock is supplied "
WCK " is displayed at the front panel window. 44.1kHz
word clock is regenerated to 16.9344MHz for the
SUPERLINK master clock.
Note: External word clock does not work at the other
connection than SUPERLINK.
SUPERLINK connection
BNC (MCK, BCK, LRCK, DATA)
CEC’s proprietary SUPERLINK interconnection via
BNC cables. There are four terminals: DATA, LRCK,
MCK and BCK which should be connected accordingly
via 75
Ω
coaxial BNC cables supplied with DA SL. You
may connect with CEC TL0 3.0, TL1N, TL2N and TL3N.
When the other BNC cables are used, make sure to
select high quality BNC cables with 75
Ω
. Sampling
frequency is
fi
xed at 44.1kHz.
D-SUB
CEC’s proprietary SUPERLINK interconnection via
D-Sub-9 cable. Connect a CD transport equipped with
a D-Sub-9 pin SUPERLINK output like TL51 series.
Note: Common D-Sub-9pin cable at computer world
cannot be recommended. You may consult with your
dealer for CEC recommended cable.
AC power
AC LINE
Connect the supplied 3-pin AC power cord to the
AC LINE inlet and the wall outlet.Connect the supplied
3-pin AC power cord to the AC LINE inlet and the wall
outlet.
CEC Holdings Co., Ltd.
CEC
DA SL
D/A Conveter
DATA
LRCK
BCK
MCK
WORD
CLOCK
INPUT
BNC
D-SUB
LEFT
RIGHT
XLR
XLR
RCA
RCA
SUPERLINK
AC LINE
44.1kHz
ANALOG OUTPUT
to an amplifier
ᵰᶁᶆ
ᵪᶁᶆ
ᵪᶁᶆ
ᵰᶁᶆ
to a clock generator
to a CD transport and player
compatible with Superlink
3-pin AC power
cord to a wall outlet
Rear Panel Functions and Connections
