background image

Notes on Charging:

• It is not necessary to connect the 1/8th inch stereo patch cable to charge the device. 

This is an audio cable. 

• The Senta-Ally can 

only

be charged using the Mini-USB port on the side of the device labeled

DC IN

. - 

Note: The Standard USB port is not for charging.

•  When charging the Senta-Ally, files from a USB drive cannot be played.
•  It will take approximately 5 hours to fully charge a dead battery. 
•  Do not leave the Senta-Ally charging for more than 24 continuous hours. 
•  A fully charged battery will last approximately 12 hours when speaker is played at medium volume 

or 8-10 hours when playing audio via Bluetooth. Louder volume means shorter battery life. 

•  The Senta-Ally uses a common Nokia BL-5C battery pack. Replacement battery packs are widely 

available on the internet or at ccrane.com. 

•  Repeated charging of the battery pack will reduce its power over time. You should replace your

battery pack when its run time is reduced to half. This should be around 500 full charges.

• To replace the battery pack, lift the cover on the back. When

inserting a new battery, make sure that the battery is positioned 

so that the gold contacts are touching the contacts inside of the  

compartment. Insert the battery carefully so as not to damage 

the connecting pins. 

Note: When the Senta-Ally is charging, turn the 

ON/ OFF

switch to the  

ON

position in order to see when the device is fully charged. When

connected to a power source via the Mini-USB cable, the Senta-Ally will  

always display 

Charging

when the 

ON/ OFF

switch is in the 

OFF

position; this is to remind you that the Senta-Ally is still connected to power.

4

5

Slide the power switch, located on the top of the Senta-Ally, to the 

ON

position

Note: Pressing and holding the 

Play/ Pause

button for 3 seconds while the power switch is in the 

ON

position will turn the power 

OFF

. To restore power, press and hold the 

Play/ Pause

button for 3 

seconds while the power switch is in the 

ON

position.

To adjust the Volume

Use the small wheel on the right side. Note: All connections/ inputs are on the right side of the unit. 

To turn the power ‘ON’

Summary of Contents for Senta














Reviews: