If your computer did not show up in the UPnP list then continue with the
remaining steps 7-16.
From the computer:
7. Open the “Control Panel” from the “Start” menu.
8. Open “Add or Remove Programs” and click “Add/Remove
Windows Components” from the pane on the left.
9. Scroll down and click on the words for “Networking Services” to
highlight it, then click the “Details” button below.
10. Be sure that the “Internet Gateway…” and “UPnP User Interface”
are checked, then click the “OK” button at the bottom of the
screen.
11. Click the “Next >” button and follow the wizard for installing a new
component.
12. Now you can start the UPnP service. To do this, click the “Start”
button, then click “Run”, then type “services.msc”, then press
“OK”.
13. Find the “SSDP Discovery Service” and open it by double clicking
on it.
14. Change the “Startup type” to “Automatic” from the drop down list,
then click “Apply”, then “Ok”.
15. Restart your computer.
16. Repeat steps 1-4 (on Page 19) again.
Note: If your radio is still having trouble accessing your computer then
make sure that “UPnP” is enabled on your router. Also be sure that
your computer and radio are connected to the same router or access
point. There may also be a firewall or software security program on
your computer that is blocking access from your radio.
Using Media Center (Continued)
Page 20 CC WiFi 2
