CC Skywave Page 11
Radio Operation
7. ATS/Bandwidth Button - Automatically Setup Presets
Automatic Tuning System (ATS). This feature programs all receivable stations in the AM, FM and Shortwave
bands to memory buttons. To use ATS, select your desired band: AM, FM or Shortwave, and press and hold
the ATS button for two seconds. The CC Skywave will scan the entire band and automatically set all available
stations in sequence 1-10. If more than 10 stations are available then the remaining stations will be preset to
the next memory page, and so on.
Setting Bandwidth Filters (for AM, SW, and Airband only)
The AM and SW bands have five bandwidth settings that can be used to filter out unwanted noise or adjacent
overlapping stations. The Airband has three filters for this. Quickly press the BANDWIDTH button to view the
current selection. Press it again to choose the setting that sounds best to you. A narrow bandwidth of 1 kHz
may work best when receiving a weak or noisy signal. For strong local signals 6 kHz is usually best, especial-
ly for music. If the station is changed then the radio will return to the default bandwidth setting. By default, the
CC Skywave is set to 3 kHz bandwidth for good audio, noise filtering, and voice quality. The default
bandwidth can be changed by holding down the bandwidth button for more than five seconds with the power
OFF. Release the button to choose the displayed selection.
8. Meter/Stereo Button - Changing Meter Bands
In the Shortwave band the METER/STEREO button will change between frequencies according to popular
meter bands.
Stereo or Mono Reception
In the FM band the METER/STEREO button will cycle between stereo and mono FM reception. Typically,
Summary of Contents for CC Skywave
Page 2: ......
