C-COM Satellite Systems Inc.
Page 33 of 38
6) While on the “Configuration” screen, Enter the
Satellite Longitude
and
Sat Offset
General Case:
1.2/1.0 Flyaway
–Receive Horizontal
Offset = 0
--Receive
Vertical
Offset = 90
The DVB Parameters (TR No., Freq, Sym,
Code Rate), and the LNB_P can be left as is.
The software will automatically set these
parameters after configuration is complete.
More detail will be explained in step 12).
7) Under the
Modem
section, set according to your modem specifications:
Type:
HNS / iDirect / Viasat / Comtech / Radyne / NA / iPSTAR / Gilat / STM/ Paradise /
Tachyon / (NA-is used for stand alone modem independent satellite
acquisition)
INF
(Interface): HTTP (for HNS Only)
TELNET (iDirect / Viasat / Comtech Telnet Interface)
COM (iDirect / Viasat / Comtech / Radyne / STM / Paradise
Console Interface)
SNMP (Radyne Interface)
UDP
NA (Must be selected if
NA
is the
Type
)
Rx-Pol
(Receive Polarity): H (Horizontal Receive)
V
(Vertical
Receive)
Tx-Pol
(Transmit Polarity): H (Horizontal Transmit)
V (Vertical Transmit)
H
(Hemisphere):
Hemisphere of Operation (East or West)
*Note:
Freq (MHz), Symb (Ksps), IP, and Password fields are NOT required for
Stand Alone Users (Type: NA), and may be left as is.
Freq (MHz)
:
(HNS Users Only)
Enter the Modem Frequency
Symb (Ksps)
:
(HNS Users Only)
Enter the Modem Symbol Rate
iNetVu
®
Flyaway User Manual