C-COM Satellite Systems Inc.
Page 14 of 38
13) Connect the reflector (inclinometer) and elevation (elevation motor) cables to the
area on the connector plate labelled “REFLECTOR” and “ELEVATION”. The cables
only fit in one direction.
14) Insert the external Motor/Sensor Cable, RX and TX coax cables into the proper
location on the connector plate labelled “CONTROLLER”.
15) Follow the “Installing BUC with the Universal Mounting Clamp kit” for mounting the
BUC onto the mounting plate of the feed arm.
16) See section 4) for controller connectivity based on your desired connection
preferences.
17) Congratulations, you have successfully assembled the iNetVu
®
Flyaway System!
iNetVu
®
Flyaway User Manual
