C-COM Satellite Systems Inc.
iNetVu™ 7710 Controller User Manual
103
8.4.
Setup Wizard
The Setup Wizard has been implemented to aid first time users in configuring their system after
the software has been installed. A Pop-up window will show at first launch allowing the user to
use the Setup Wizard (select Yes) or to bypass it (select No) and use it at a later time. Selecting
“Cancel” will exit the Setup Wizard. This window will show every time the
iNetVuMobile7710
software is executed, select “Do not show this message again” to allow software to go straight
to the Controls Window when the software is launched. The Wizard can be launched at any time
as it will be added as a menu option. See appendix for complete instructional steps on using the
Setup Wizard.
The Wizard will check Firmware and Software versions if “Yes” is selected to validate the
versions are the same and prompt the user to update the Firmware if they are different.
The wizard will automatically resume after the Firmware update has completed, follow
onscreen prompts. The wizard will not continue and go back to the previous window if “No” is
selected.