Copyright 2017 © C. B. Gitty Crafter Supply 3
Kit Inventory
Refer to the labeled photo above to identify each of the parts in your kit. Verify that everything is present and
that you are familiar with what’s what.
A. (1) Black plastic 9-volt Battery Tray with (2) mounting screws
B. (6) Black Phillips-head screws
C. (2) Mono phone jacks
D. (1) Chickenhead Pointer Knob
E. (1) Pre-wired Psycho Knob Circuit Board with leads & quick connectors
F. (1) Laser-engraved Faceplate with (4) mounting screws
Not Shown: (1) Small Cigar Box (optional, depending on kit options chosen. If included, box
styles will vary. If using your own box/enclosure, some modification of the steps below may be need-
ed.)
Tools Needed
The following tools and supplies are what we recommend for completing this kit—they are the same ones we
used when making this guide. You may be able to substitute other tools and methods, but please before us-
ing any tool (hand or power) make sure you follow all safety recommendations!