1
INTRODUCTION
The compressor you have purchased is a combination of nearly 100 different components, all of which have been carefully designed,
engineered, and assembled to ensure a long, dependable, trouble-free life� The product has been fully tested at the factory and has gone
through quality-control inspection prior to shipping�
Like any mechanical piece of equipment, it is necessary to fully understand the proper use of its operation and application�
Misuse of this valuable and helpful air-power source may shorten its expected life as well as void the warranty of the entire unit�
We ask you take the time to read this manual to ensure the dependable service you can expect from your C-Aire compressor�
Failure to do so can cause serious injury and may void all warranties�
Please take special notice of the safety precautions and safety information contained in this manual� Compressed air, like electricity,
is a very helpful and necessary tool� However, compressed air can be extremely dangerous and harmful when it is not understood or is
misused�
PRODUCT NUMBERING SYSTEM
■
SET PRESSURE IN SECONDS
■
IDEAL FOR SINGLE VALVE SYSTEMS
■
INCLUDED:
•
ANCHOR BOLTS
•
POWER CORD (for installation and testing purposes)
!
WARNING
: Refer to the authority having jurisdiction
regarding hard wiring requirements�
■
AVAILABLE ACCESSORIES
ACCESSORY
PART NUMBER
FLOOR MOUNTING KIT
INSTALL-S28
1/2” X 30” STAINLESS STEEL FLEXIBLE HOSE
DT 3005 H / PACK OF 5: DT 3005 H-5PK
1/2” X 48” FLEXIBLE HOSE
DT 4805 H / PACK OF 5: DT 4805 H-5PK
1/2” X 72” FLEXIBLE HOSE
DT 7205 H / PACK OF 5: DT 7205 H-5PK
SYNTHETIC OIL
LU E100 QT
Listings:
Pressure Switch: USA: UL 508 Canada: C22�2 No� 14
SPECIFICATIONS S244
S600
S910
HP
�5
1
2
SYSTEM CAPACITY
40 PSI 244 GALLONS
40 PSI 615 GALLONS
40 PSI 911 GALLONS
18 PSI 614 GALLONS
18 PSI 1510 GALLONS 18 PSI 2,193 GALLONS
10 PSI 1,188 GALLONS 10 PSI 2,962 GALLONS 10 PSI 4,178 GALLONS
PRESSURE SWITCH
ADJUSTABLE: 5-55 PSI
FACTORY SET AT 10-20 PSI
MINIMUM DIFFERENTIAL: 5 PSI
MAXIMUM WORKING PRESSURE FOR UNIT: 40PSI
CFM
3�18 CFM @ 10 PSI
7�58 CFM @ 10 PSI
11�46 @ 10 PSI
PUMP
1 CYLINDER, OIL
LUBRICATED
2 CYLINDER, OIL
LUBRICATED
2 CYLINDER, OIL
LUBRICATED
CYLINDERS
CAST IRON
VOLTS
115/230*
115/208/230*
208/230
PHASE
1
RUNNING AMPS
5�6
9�0
12�1
BREAKER SIZE
10 AMP
RECOMMENDED
15 AMP
RECOMMENDED
20 AMP
RECOMMENDED
DIMENSIONS
B: 28” X 14” X 18”
P: 32" X 21" X 22�5"
28” X 15” X 19�5”
28” X 15” X 19�5”
WEIGHT
B: 75 LBS
P: 90 LBS
125 LBS
125 LBS
* These units should not be rewired to change between 115/230v� This is because the solenoid
is different and will not work properly on the other voltage
