C-Aire S244B Manual Download Page 16

C-Aire Inc. warrants its compressors to be free from defects in material and workmanship subject to the following provisions:  

STANDARD WARRANTY DURATION:

 12 months from date of purchase.

WHAT THE WARRANTY COVERS DURING THE WARRANTY DURATION:

 All components on the compressor except 

for those items listed in the section titled “What is excluded from warranty coverage”.

WHAT IS EXCLUDED FROM THE WARRANTY COVERAGE:

 

A)  Air intake filters and compressor oil, which are maintenance items.
B)  Failure due to improper installation, including absence of mounting pads, and insufficient power.
C)  Oil leaks will be covered under warranty for a period of 60 days from purchase.
D)  Freight damaged items. (REJECT THE SHIPMENT or note damage on Bill of Lading)
E)  Any labor, freight or transportation charges that are not pre-approved by C-Aire.
F)  Labor charges incidental to the installation, electrical connections, repair, service, adjustment, removal, or replacement.

G)  Misuse or abuse.
H) C-AIRE HAS NO OBLIGATION UNDER THESE WARRANTIES OR OTHERWISE (REGARDLESS OF THE FORM OF ACTION) FOR 

SPECIAL, INDIRECT, CONSEQUENTIAL OR INCIDENTAL DAMAGES, INCLUDING WITHOUT LIMITATION, LOSS OF USE, LOST 

PROFITS, LOST INCOME, WHETHER SUFFERED BY THE BUYER OR A THIRD PARTY.  

HEAVY DUTY SERIES WARRANTY:

 C-Aire warrants its compressor pumps from the “Heavy Duty” Series (noted by the 

“HD” in its part number) to be free from defects in material and workmanship for a period of 36 months from the date of 
purchase.  The 3 year warranty for “HD” units only covers the compressor pump.  All other components are covered under the 
“Standard Warranty Duration”, which is 12 months from date of purchase. 

C-AIRE’S OBLIGATIONS:

  C-Aire will repair or replace, at C-Aire’s option, defective parts, pay reasonable labor costs of 

replacing or repairing the defective part, and pay ground freight for the return of defective parts and shipment of the 
replacement part(s).  ALL LABOR AND FREIGHT MUST BE PRE-APPROVED AND ARRANGED BY C-AIRE.

PURCHASER’S OBLIGATION:

 

1)  Properly install and start up the compressor using the checklist located at the back of this Owner’s Manual.  

(Keep “Installation Checklist” for future reference.)

2)  Ensure the compressor is sized properly for the application.

(the compressor should run no more than 6 out of 10 minutes on average.)

3)  Maintain proof of purchase and Installation Checklist.

WARRANTY CLAIMS:

  Please contact C-Aire at 1-800-762-2247 or 651-462-3440. Please have your completed 

Installation Checklist available.

WARRANTY

OIL FREE COMPRESSOR

C-Aire Inc� warrants its compressors to be free from defects in material and workmanship subject to the following provisions: 

STANDARD WARRANTY DURATION

: 12 months from date of install�

WHAT THE WARRANTY COVERS DURING THE WARRANTY DURATION

: All components on the compressor except 

for those items listed in the section titled “What is excluded from warranty coverage”�

WHAT IS EXCLUDED FROM THE WARRANTY COVERAGE

A)  Air intake filters, which is a maintenance item�
B)  Failure due to improper installation, insufficient power, or absence of mounting pads on floor mounted units�
C)  Freight damaged items� (REJECT THE SHIPMENT or note damage on Bill of Lading)
D)  Any labor, freight or transportation charges that are not pre-approved by C-Aire�
E)  Labor charges incidental to the installation, electrical connections, repair, service, adjustment, removal, or replacement�
F)  Misuse or abuse�
G) 

C-AIRE HAS NO OBLIGATION UNDER THESE WARRANTIES OR OTHERWISE (REGARDLESS OF THE 

FORM OF ACTION) FOR SPECIAL, INDIRECT, CONSEQUENTIAL OR INCIDENTAL DAMAGES, INCLUDING 
WITHOUT LIMITATION, LOSS OF USE, LOST PROFITS, LOST INCOME, WHETHER SUFFERED BY THE 
BUYER OR A THIRD PARTY.  

C-AIRE’S OBLIGATIONS:

  C-Aire will repair or replace, at C-Aire’s option, defective parts, pay reasonable labor costs 

of replacing or repairing the defective part, and pay ground freight for the return of defective parts and shipment of the 
replacement part(s)�  ALL LABOR AND FREIGHT MUST BE PRE-APPROVED AND ARRANGED BY C-AIRE�

PURCHASER’S OBLIGATION: 

1)  Properly install and start up the compressor�
2)  Ensure the compressor is sized properly for the application� The compressor should run no more than 30 minutes/day on 

average after initial system fill�

3)  Maintain proof of purchase�

WARRANTY CLAIMS

:  Please contact C-Aire at 1-800-762-2247 or 651-462-3440� Please have your Model and serial 

number available�

Summary of Contents for S244B


















Reviews: