1
INTRODUCTION
The compressor you have purchased is a combination of nearly 100 different components, all of which have been carefully designed,
engineered, and assembled to ensure a long, dependable, trouble-free life� The product has been fully tested at the factory and has gone
through quality-control inspection prior to shipping�
Like any mechanical piece of equipment, it is necessary to fully understand the proper use of its operation and application�
Misuse of this valuable and helpful air-power source may shorten its expected life as well as void the warranty of the entire unit�
We ask you take the time to read this manual to ensure the dependable service you can expect from your C-Aire compressor�
Failure to do so can cause serious injury and may void all warranties�
Please take special notice of the safety precautions and safety information contained in this manual� Compressed air, like electricity,
is a very helpful and necessary tool� However, compressed air can be extremely dangerous and harmful when it is not understood or is
misused�
PRODUCT NUMBERING SYSTEM
Mount
P
244
600
280
281
■
SET PRESSURE IN SECONDS
■
IDEAL FOR SINGLE VALVE SYSTEMS
■
INCLUDED:
•
ANCHOR BOLTS
•
POWER CORD (for installation and testing purposes)
!
WARNING
: Refer to the authority having jurisdiction
regarding hard wiring requirements�
■
AVAILABLE ACCESSORIES
ACCESSORY
PART NUMBER
FLOOR MOUNTING KIT
INSTALL-S28
1/2” X 30” STAINLESS STEEL FLEXIBLE HOSE
DT 3005 H / PACK OF 5: DT 3005 H-5PK
1/2” X 48” FLEXIBLE HOSE
DT 4805 H / PACK OF 5: DT 4805 H-5PK
1/2” X 72” FLEXIBLE HOSE
DT 7205 H / PACK OF 5: DT 7205 H-5PK
SYNTHETIC OIL
LU E100 QT
Listings:
Pressure Switch: USA: UL 508 Canada: C22�2 No� 14
SPECIFICATIONS
S244
S600
HP
�5
1
SYSTEM CAPACITY
40 PSI 244 GALLONS
40 PSI 615 GALLONS
18 PSI 614 GALLONS
18 PSI 1510 GALLONS
10 PSI 1,188 GALLONS
10 PSI 2,962 GALLONS
PRESSURE SWITCH
ADJUSTABLE: 5-55 PSI
FACTORY SET AT 10-20 PSI
MINIMUM DIFFERENTIAL: 5 PSI
MAXIMUM WORKING PRESSURE FOR UNIT: 40PSI
CFM
3�18 CFM @ 10 PSI
7�58 CFM @ 10 PSI
PUMP
1 CYLINDER, OIL LUBRICATED
2 CYLINDER, OIL LUBRICATED
CYLINDERS
CAST IRON
CAST IRON
VOLTS
115/230*
115/230*
PHASE
1
1
RUNNING AMPS
5�6
9�0
BREAKER SIZE
10 AMP RECOMMENDED
15 AMP RECOMMENDED
DIMENSIONS
28” X 14” X 18”
28” X 19” X 25”
WEIGHT
75�0 LBS
125�0 LBS
* These units should not be rewired to change between 115/230v� This is because the solenoid
is different and will not work properly on the other voltage
