25
Focus range: set the focus range (the default middle,the upper and lower optional)
Focus Sensitivity: Set the focus sensitivity (default is low,high,medium optional)
b,Exposure:Eexposure mode,exposure compensation,back light compensation,anti-flicker,gain limit,wide dynamic,shutter
speed,aperture value and brightness can be set.
Exposure Mode:
Set the exposure mode (the default automatic,manual,shutter priority,aperture priority,Brightness priority optional)
Exposure compensation:
Exposure compensation setting is active when it is auto status (default is off).
Exposure compensation value:
Set the exposure compensation value,valid when it is set for auto(default 0,-7 to 7 optional).
BLC
: Set back light compensation,valid when it is auto status (default is off).
Anti-flicker:
Set up anti-flicker mode,valid when status of automatic,aperture or brightness priority (default 50Hz,closed,60Hz
optional).
Gain limit:
set the gain limits,auto,active when it is status of aperture or brightness priority
Dynamic range:
set the dynamic range
Shutter speed:
active when it is status of manual or shutter-priority.
Aperture value:
Set the aperture value,active when it is status of manual or aperture-priority(default F1.8,closed,
F9.6,F8.0,F6.8,F5.6,F4.8,F4.0,F3.4,F2 .8,F2.4,F2.0,F1.8 optional).
Brightness:
Set the brightness value,active when it is a state of brightness priority (default 7,0-23 optional).
c,Color:White balance,saturation,color,white balance,sensitivity,color temperature,gain red and blue gain can be set.
White balance modes:
Set the white balance mode (the default automatic,3000K,4000K,5000K,6500K,manual,One-push
optional).Note: Click the “Correction” button when selected the One
-push white balance mode.
Saturation:
Set the saturation (default 80%,60%,70%,80%,90%,100%,110%,120%,130%,optional).
Auto white balance Sensitivity:
Sensitivity Auto white balance settings (default is low,high,medium optional).
Chroma
: Set the chrome (default 7,0-14 optional).
Color Temperature:
set color temperature(Default setting:High,with low,middle for options)
Red Gain
: Set the red gain,effective when it is manual (default 255,0-255 optional).
Blue Gain:
Sets the Blue gain,effective when it is manual (default 199,0-255 optional).
d,Image:Brightness,contrast,sharpness,black and white mode,the gamma curve,Horizontal Flip and Vertical Flip can be set.
Brightness:
Set the brightness (default 6,0-14 optional).
Contrast:
set the contrast (default 8,0-14 optional).
Sharpness
: Set the sharpness value
Black and white mode:
Set black and white mode (default color,black/white optional ).
Gamma
: Gamma value setting (default,0.45,0.50,0.52,0.55 optional).
Flip Horizontal
: Set Flip Horizontal (default Off,On optional).
Flip Vertical:
Set vertical flip (default Off,On optional).
e. Noise Reduction: 2D noise reduction,3D noise reduction and dynamic dead pixel correction available.
2D Noise Reduction
: Set 2D noise reduction level (default Auto,1-7 and Off optional).
3D Noise Reduction
: Set 3D noise reduction level.
Dynamic dead pixel correction:
Set Dynamic dead pixel correction (default Off,1-8 optional).
Note: Click “Refresh”to make revision of any video parameters of
a,b,c,d,e effective .
4) Character-Overlapping
Display date and time:
Set whether to display the time and date (default display).
Display Title:
Set whether to display the title (default display).
F
ont Color of Time:
Set font color of time and date (default white,black,yellow,red,blue optional).
F
ont Color of Title:
Set font color of title (default white,black,yellow,red,blue optional).
Moving characters
: Set the display position of moving date,time and title ,click on the "up,down,left,right" buttons to
move the corresponding character position.
Title Content:
Set title content (default CAMERA1).
Time Content:
Set time content (default 1970/01/10 05:36:00)
Click on the "Save" button and display the "Save successful" message,then valid
5)Character Size
Main stream character size: Set the character size of the display,the device will restart
automatically after changed and saved (default 24,24,16 optional)
Secondary stream character size: Set the character size of the display,the device will restart automatically after changed and
saved(default 16,24,16 optional)
Click on the "Save" button to display "Parameter saved successfully" message,set to take effect
6)Video output
