Parts Checklist for Yellow Overdrive Kit
Resistors:
1 - 470 ohm (Yellow/Purple/Black/Black/Brown)
1 - 1k (Brown/Black/Black/Brown/Brown)
3 - 4k7 (yellow/purple/black/brown/brown)
4 - 10k (Brown/Black/Black/Red/Brown)
3 - 33k (Orange/Orange/Black/Red/Brown)
1 - 100k (Brown/Black/Black/Orange/Brown)
1 - 220k (Red/Red/Black/Orange/Brown)
2 - 470k (Yellow/Purple/Black/Orange/Brown)
Capacitors:
1 - .018uF or 18nF film
2 - .047uF of 47nF film
2 - 0.1uF or 100nF film
1 - 1uf film
1 - 10uf Aluminum Electrolytic
1 - 47uf Aluminum Electrolytic
1 - 100uf Aluminum Electrolytic
Diodes:
3-1n4148 diodes
IC's:
1-DIP 14 socket
1-3403 ic
Potentiometers: SNAP THE SMALL TABS ON THE TOP OF THE POTS OFF WITH A
PAIR OF NEEDLE NOSE PLIERS
1 – B10k Linear Volume pot
1 – A1M Audio Drive pot
Summary of Contents for Yellow Overdrive
