BYOC Reverb, Instructions Manual

Page: 15 / 32

STEP 9
:
Add the Reverb Module to the underside of the PCB. BUT FIRST!!!! Take a
break. Once you've soldered the reverb module in place, you will have locked many of
the components that are on the other side of the PCB in. And to get to them, you'll need
to desolder and remove the Reverb Module. It's not the end of the world if you do, but
you want to avoid having to desolder and fix mistakes whenever possible. So take a rest
at this point. Then come back and check your work so far. Are you absolutely certain you
have all the resistors and capacitors in their correct spots? How do your solder joints
look?