6
Potentiometers: SNAP OFF THE SMALL TABS ON THE TOP OF THE POTS
OFF WITH A PAIR OF NEEDLE NOSE PLIERS.
IF YOUR POTS HAVE COVERS,
REMOVE THEM BEFORE CONTINUING. YOU MIGHT HAVE TO CUT A SLIT IN THE
COVER WITH A BLADE AND USE A SMALL SCREWDRIVER TO GET LEVERAGE.
2 - B10k (SPEED, MIX)
1 - B50k (OUTPUT LEVEL)
2 - B100k (INPUT LEVEL, DEPTH)
1 - C100k (REGEN)
Hardware
:
1 - predrilled enclosure w/ 4 screws
1 - Phase Royal Printed Circuit Board
1 - 3PDT Footswitch
4 - 1X4 Header socket
2 - Enclosed Jacks
1 - Switching Jack
4 - rubber bumpers
2 - lock washers (for in and out jacks)
hook-up wire
Summary of Contents for Phase Royal
Page 8: ...8 Step 2 Add the header sockets...
Page 18: ...18 At this point your build will look like this Front...
Page 19: ...19 Back...
Page 28: ...28...
