BYOC Parametric EQ Instructions Manual Download Page 1

Build Your Own Clone

 Parametric EQ

Kit Instructions

Warranty:

BYOC, LLC guarantees that your kit  will be complete and that all parts and components

will arrive as described, functioning and free of defect.  Soldering, clipping, cutting,

stripping, or using any of the components in any way voids this guarantee.  BYOC, LLC

guarantees  that the instructions for your kit will be free of  any majors errors that would

cause you to permanently  damage any components in your kit, but does  not guarantee

that  the instructions will be free of typos or minor errors.   BYOC, LLC does not

warranty the completed pedal as a whole functioning  unit  nor do we warranty any of the

individual parts once  they have been  used.  If you have a component that is used, but

feel it was defective  prior to you using it, we reserve  the right to determine whether or

not the component was faulty upon arrival.  Please direct all warranty issues to:

[email protected]  This would include any missing parts issues.

Return:

BYOC, LLC accepts returns and exchanges  on all products for any reason, as long  as

they are unused.  We do not accept partial kit returns.  Returns and exchanges are for the

full purchase price less the cost of  shipping and/or any promotional pricing.  Return

shipping is the customers responsiblity.  This responsibility not only includes the cost of

shipping, but accountability of deliver as well.  Please contact

[email protected] to receieve a return authorization before mailing.

Summary of Contents for Parametric EQ




























Reviews: