BYOC Li'l Analog Chorus Kit, Building Instructions, Page: 21 / 26

Step 2: Once the AC jack, potentiometer, and IN/OUT jacks are wired,
insert the LED in its hole. Insert the long lead into the square hole!!! You
might want to slightly bend the leads away from each other to keep them in
the holes for now. DO NOT SOLDER YET
Step 3: Flip the PCB right-side-up, tuck the wires into the enclosure, and
place the PCB onto the footswitch. DO NOT SOLDER YET!!!!!
Make sure you tuck your wires carefully.
It is extremely important that when you place the PCB on the footswitch,
you make sure to tuck all the wires out of the way so that that PCB can rest
flush against the enclosed jacks and footswitch.