10
STEP 3: Add the 8 pin IC socket.
ONLY SOLDER THE SOCKET! NOT THE
ACTUAL IC!
This is a socket. The sockets get soldered to the PCB. The ICs get
inserted into the sockets. The actual IC chip itself, never gets soldered. You will insert
the IC into the socket after the entire pedal has been built.
See page 25 for instructions on how to install the IC into the socket.
Summary of Contents for Gray 1976
