Finishing Touches
Install the base of the enclosure with the 4 screws that came with your kit. Add the rubber
bumper feet...unless you're a velcro person. That's it. You're done. If you've got any
problems that you can't figure out yourself, visit
board.buildyourownclone.com
for
technical support.
Note that the range and level knobs don't really have much affect over their labelled
parameters. This is just what DOD decided to call them. It's hard to give either one of
the knobs on this pedal a specific name. They are both extremely interactive.
Here's a few quick trouble shooting tips for common problems:
1. NO SOUND AT ALL IN EITHER BYPASS OR ON . You have a problem with the
wiring on your jacks and footswitch
2. BYPASS WORKS, BUT NO SOUND OR LED WHEN ON . You have a problem
with your AC jack/battery wiring.
3. PEDAL WORKS BUT NO LED. Make sure you've got your LED in correctly.
4. BYPASS WORS AND LED COMES ON WHEN THE PEDAL IS ON , BUT NO
WET SOUND. Most likely you did something wrong when populating the PCB. Double
check your component placement and reflow your solder joints.
Summary of Contents for Envelope Filter
Page 7: ......
