Step 3: Connect the pre stripped and tinned wires to the 1/4 jacks.
Step 4:
·
Cut 4 x 3/4 pieces of wire. Strip 1/8 off each end. These will be used to connect
lugs/eyelets 1, 2, 7, & 8
·
Cut 1 x 1 piece of wire. Strip 1/8 off each end. This will be used to connect
lug/eyelet 5
·
Cut 1 x 1.5 peice of wire. Strip 1/8 of one end. Strip 1/2 off the other end. This
will be used to connect lug/eyelet 4. The longer stripped end will be used to jumper
lug 4 to 9.
