19
Wiring the jacks
Step 1: Install the enclosed jacks into the enclosure. Be sure to ‘clock’ the jacks. In
other words, make sure to orient them in such a way that the solder terminals of the
jacks don’t come into contact with anything they’re not supposed to. Any orientation
will work, as long as you are mindful of the terminal designations as shown above.
Summary of Contents for Brown Face Tremolo
Page 20: ...20 Step 2 Connect the three 2 5 inch pre stripped and tinned wires to the enclosed jacks...
Page 28: ...28...
Page 30: ...30...
