（
3
）
Drill the holes.
Insert the screws into the dowels and fasten the screws. The screws
should protrude approx.1.5 cm from the dowels
；
（
4
）
Tear off the back protective film,
Hang the mirror (A) on the screws and move it to
one direction.
Note: please tear off the front and back protective film once you start to use.
OPERATION
START-UP
：
1.
Check if the power cord is intact.
2.
Check if the power supply voltage is consistent, the power socket is required to have a
grounding terminal and good grounding performance.
3.
Whether the power cord plug and socket are matched, the socket can withstand
110-240V/50HZ, 10A. If it is lower than this value, it cannot be used to avoid accidents.
FUNCTIONAL OPERATING INSTRUCTIONS
：
6
