x28
x4
x8
x8
x1
x8
x8
x2
x1
x4
CONEKT
ASSEMBLY GUIDE FOR CONEKT DINING TABLE
1
2
3
4
5
6
7
8
9
~
1
Package contents.
2
Screw the eight threaded metal rod pieces clockwise into the matching holes in the leg
sections.
3
Insert the eight wooden dowels into the matching holes in the leg sections.
4
Mount the leg sections to the tabletop. Please make sure not to scratch the tabletop when
facing upside down by placing a blanket underneath.
5
Attach the washer and nut to the threaded metal rod. Quick tip – it can be easier to mount
the nut if the leg sections are left with a gap of approx. 10mm to the end of the tabletop.
6
Use the spanner to tighten the nut by turning it clockwise. Make sure all eight nuts are
tightened evenly.
7
Place the brackets in all four corners, making sure that the brackets with the sunken holes
are placed on the outside.
8
Insert the screws into the pre-drilled holes and tighten them by turning them clockwise.
9
You are done. Enjoy!
approx. 10 mm
washers
nuts
spanner
metal
rods
wooden
dowels
leg
sections
screws
tabletop
inner
brackets
x28
x8
x8
x1
x8
x8
x2
x1
outer
brackets