EN
35
Interrupting the production:
Brief pressing
of the
[ON/OFF] button
, the device swit-
ches to
“PAUSE“
. The device restarts after pressing the
[O]
button
and is immediately available for operation.
Switching the unit OFF (only possible during operation):
For a complete deactivation of the device please press
the
[ON/OFF] button
for about
2s
.
Switching on again of the unit:
By pressing the
[ON / OFF]
button for about
(2s)
, the de-
vice starts the automatic start sequence an is immediately
into the production mode
(see
part 3.3
).
Comments on the display:
Note:
The display switches OFF after about
120s
.
Just before stand-by switching into the black display
the following text is been shown:
“
DISPLAY OFF“
.
A brief pressing of any key re-activates the display.
PAUSE / “Offline mode“:
In the pause status, the unit is programmable, but doesn‘t switch
into production
(no processing of inlet pressure- signals / or optio-
nal remote-controlled ON-OFF signals)
. The units control display
shows the operating status
“pause“
.
'
Press the arrow keys to call up the detailed overview screen.
p
a
u
s
e
PERM
3.2
bar
PUMP
_
_
_
bar
25–
06
–
13
09
:
02
PAUSE
16
_
_
_
Fig. 6:
Display shows
“PAUSE“
and the RO unit
is therefore programmable.
3.3 Switching the device ON and OFF
Switching the device ON:
To activate the device, it has be correctly connected to
the power- and water supply.
The device is activated by pressing the
[ON/OFF] button
and starts immediately (approx.2sec) if an permeate
demand is detected (thereby pressure dependent).
Subsequently the
autotest mode
starts and the device
is routinely checked, rinsed and filled with feed water.
Automatic start sequence of device:
BEST WATER TECHNOLOGY
Logo of the manufacturer
self
test
Internal function check of sensors,
electronics and pump
self
test ok
Completed self test
rinsing
RO being is pre-rinsed
ready
Unit is ready
3.4 Menu display of the activated system
Note:
In the operating mode
“working/WORKING“
starts
and stops the unit in accordance with the request signal
(min./max. permeate pressure) or the optional remote
ON / OFF
. The units display indicates the operating
status
“working“
:
'
Press the arrow keys to call up the detailed overview screen.
w
o
r
k
i
n
g
PERM 3.2 bar
PUMP 8.1 bar
018
FLOW 124 l/h
16
WORKING
*
Fig. 5:
The display is in operating status
“
WORKING
“
,
the stop pressure (signal) has not been reached yet.
Summary of Contents for PERMAQ compact 2
Page 3: ...3 DE Inhaltsverzeichnis DE...
Page 151: ......
