28
EN
7.2
Start up Infinity AP only
The required backwash interval must be set on
the filter.
The setting is made with the Set key
Key Display
Press Set for 5 seconds
SL 0
Display dots flash
Device is in programming mode
Press Set
SL 1
Press Set
SL 2
Press Set
SL 3
Press Set
1 h
Pressing the Set key again steps up the number of
h (hours) or d (days).
The hours h run from 1 – 24, followed by days d from
2 – 56, followed by the hours again etc.
Press the Set key until the desired value has been
set. The value is saved 10 seconds after the last in-
put. The display dots fade out. The unit backwashes.
The time until the next backwashing and the pres
-
sure difference appear alternately in the display.
The pressure difference is only displayed for large
volumes of water.
The filter is ready for use.
CIC
24 V
Input
Output
Set
