BWT Disinfecton, Installation And Operating Manual

Page: 4 / 36

4
Safety Instructions
This manual contains general instructions that must be read before installation, operation and maintenance
of the machine. It must be read by both the installer and the operator, prior to installation and start-up, and
must always be available at the installation location.
This manual uses the following markings:
Warning
If these warnings are not adhered to, it might result in personal injury
Caution
If these safety instructions are not adhered to, it might result in
malfunction and damage to the machine and/or installation
Note
If these notes are adhered to, it will make installation and maintance
easier.
Qualifications of installer and operator
The installer must be sufficiently qualified to install the machine and must adhere to the local standards
regarding the electrical and hydraulic installation.
The operator must be sufficiently trained in the workings of the machine, with emphasis on the safety
instructions in this manual.
If the safety instructions are not followed, it might lead to personal injury and result in loss of warranty.
Generally Safety instructions
The safety instructions given in this manual and any existing local legislation on health protection must be
adhered to.
Always disconnect the water and power supply before working inside the machine. The machine forms small
amounts of hydrogen as a by-product of disinfection fluid production. Inadequate ventilation can lead to an
explosive atmosphere. The water quality must meet drinking water specifications – if this is not adhered to,
the softener and cell can be damaged. Neuthox® and residual chloride can become corrosive at high
concentrations – beware of material specifications in application.