BWI Eagle AIR-EAGLE SR 38-5000-AC, Product Information Bulletin

Page: 2 / 3

AIR-EAGLE
®
SR
2.4 GHz RF Receiver
MODEL 38-5000-AC
RELAY OPERATION
Relays energize based on commands received from the transmitter. See
table below for relay mode configuration for this receiver:
TX BUTTON
OR INPUT
ACTIVATED
RELAY OPERATION
– MODE
1 Relay #1 Energizes, Maintained Momentary
2 Relay #2 Energizes, Maintained Momentary
3 Relay #3 Energizes, Maintained Momentary
4 Relay #4 Energizes, Maintained Momentary
Maintained Momentary
– Relay mimics button or input – when
depressed or closed, relay will be energized; when released, relay
de-energizes
DIGITAL ADDRESS & FREQUENCY SET-UP
The unit is shipped from the factory with SEL1 switches set so that unit is
receiving commands on Digital Address
“1” / Frequency “1”. If you wish to
change these default settings, follow the instructions on the table below.
1) Remove power from unit.
2) Remove top cover.
3) Select desired digital address and/or network frequency using table
below.
4) Reattach cover and apply power.
5) Programming is now complete.
DIGITAL ADDRESS SET-UP
S
E
L
1
(S
W
1
-4)
Digital
Address
SW1 SW2 SW3 SW4
1 (default) OPEN OPEN OPEN OPEN
2 CLOSED OPEN OPEN OPEN
3 OPEN CLOSED OPEN OPEN
4 CLOSED CLOSED OPEN OPEN
5 OPEN OPEN CLOSED OPEN
6 CLOSED OPEN CLOSED OPEN
7 OPEN CLOSED CLOSED OPEN
8 CLOSED CLOSED CLOSED OPEN
9 OPEN OPEN OPEN CLOSED
10 CLOSED OPEN OPEN CLOSED
11 OPEN CLOSED OPEN CLOSED
12 CLOSED CLOSED OPEN CLOSED
13 OPEN OPEN CLOSED CLOSED
14 CLOSED OPEN CLOSED CLOSED
15 OPEN CLOSED CLOSED CLOSED
16 CLOSED CLOSED CLOSED CLOSED
FREQUENCY SET-UP
S
E
L
1
(S
W
5
-7
)
Network
Frequency
SW5 SW6 SW7
1 (default) OPEN OPEN OPEN
2 CLOSED OPEN OPEN
3 OPEN CLOSED OPEN
4 CLOSED CLOSED OPEN
5 OPEN OPEN CLOSED
6 CLOSED OPEN CLOSED
7 OPEN CLOSED CLOSED
8 CLOSED CLOSED CLOSED
SW8 & SW9 Not used on this model
SPECIFICATIONS
Power Supply 100-250 VAC, 5 W, 50/60 Hz
Relay Contacts
SPDT 5 amp @ 120VAC or 30VDC per
channel
Fuse Protected 2 amp
Receiver Frequency 2.4 GHz Spread Spectrum
Receiver Range Up to 600 feet
Note: Range figures are estimates, based on free-air terrain with limited sources of
interference. Actual range will vary based on transmitting power, orientation of transmitter
and receiver, height of transmitting antenna, height of receiving antenna, weather
conditions, interference sources in the area, and terrain between receiver and transmitter,
including, but not limited to, indoor and outdoor structures such as walls, metal objects,
trees, buildings, hills, and mountains.
Digital Addresses Sixteen independent digital addresses
Network Frequencies
Eight independent network frequencies
Operating Temperature -40
o
F to +185
o
F
Enclosure Polycarbonate, IP66 (NEMA 4)
Weight Approx 2.11 lbs.
APPROVALS
United States (FCC) MCQ-XBEE3
Canada (IC) 1846A-XBEE3
Europe (CE) ETSI
ACCESSORIES
Standard Antenna (Included):
2.4GHz TNC “Rubber Duck” Antenna
49-1201
Mobile/Base Antennas
–
Used to help achieve max range in both non line of sight and line of
sight applications. - Contact BWI Eagle for recommendations
2.4GHz Thru-Hole Mount Mobile Antenna 49-2201
2.4GHz Magnet Mount Mobile Antenna 49-2202
2.4GHz Omni Directional Base Antenna 49-3201
2.4GHz Yagi Directional Base Antenna 49-3202
High Quality Coax Cables
–
Used to connect external high gain antennas to control unit
Flex Coax Cable w/Connectors
– Available in
5’,15’,25’,30’,40’,60’,80’,100’ Lengths
49-4000-XX
(XX = # of
Feet)
Bulkhead Extensions
–
Used to provide an external antenna connection when mounting
control unit inside another enclosure
TNC Male to TNC Bulkhead Cable Assembly -
Available in 2’, 4’, 7’ Lengths 49-5004-X-ISO
(X = # of Feet)
LIMITED WARRANTY STATEMENT
BWI Eagle Inc. warrants the Air-Eagle Remote Control System, if properly used and
installed, will be free from defects in material and workmanship for a period of 1 year after
date of purchase. Said warranty to include the repair or replacement of defective equipment.
This warranty does not cover damage due to external causes, including accident, problems
with electrical power, usage not in accordance with product instructions, misuse, neglect,
alteration, repair, improper installation, or improper testing. This limited warranty, and any
implied warranties that may exist under state law, apply only to the original purchaser of the
equipment, and last only for as long as such purchaser continues to own the equipment.
This warranty replaces all other warranties, express or implied including, but not limited to,
the implied warranties or merchantability and fitness for a particular purpose. BWI Eagle
makes no express warranties beyond those stated here. BWI disclaims without limitation,
implied warranties of merchantability and fitness for a particular purpose. Some jurisdictions
do not allow the exclusion of implied warranties so this limitation may not apply to you. To
obtain warranty service, contact BWI Eagle for a return material authorization. When
returning equipment to BWI Eagle, the customer assumes the risk of damage or loss during
shipping and is responsible for the shipping costs incurred.
DOCUMENT DATE: 11/04/2021 / PRODUCT REV. 10