Get current Wi-Fi information and status
Send: WLAN+STATUS
Return: Current Status: SSID<current network name> Password<current password>
Connected or Disconnected
OK
Get the current Socket information and status:
Send: STATUS
Return: Current Status: Protocol<current protocol> IP<current target IP> Port<current port>
Connected or Disconnected
OK
WF-WM410
WiFi Wireless High
Speed
High
Precision
Inclinometer
⑧
SOCKET socket settings and acquisition
The protocol can choose TCP or UDP protocol, the actual sending frequency (pack/s) of UDP can be higher
but the packet will be lost. Higher transmission frequency does not mean higher transmission speed (Byte/s)
or higher automatic output frequency upper limit (Hz) that can be set. Under normal circumstances, the limit
transmission speed using UDP is only slightly higher than that using TCP, but Using UDP can significantly
reduce the combined sending of multiple packets.
Set Socket information:
Send: SET+TCP or UDP+target IP+target port
Return: OK
Example: SET+TCP+192.168.0.1+4001
⑨
ZERO zero state setting and acquisition
Setting the relative zero point will use the current angle as the zero point reference, and setting the
absolute zero point will clear the relative zero point information and use the factory-set zero point as the
zero point reference.
Set relative zero point or absolute zero point
Send: ZERO+SET+RELATIVE (relative zero) or ABSOLUTE (absolute zero)
Return: OK
Bewis Sensing Technology LLC
www.bwsensing.com
Tel:
+86 18906177922
