Bewis Sensing Technology LLC www.bwsensing.com Tel
：
+86 18921292620
BW-IMU710
Small-size three-axis fiber optic
Gyroscope inertial measurement unit
Installation
The user is responsible for the installation and disassembly of the product. During this
process, the product cannot be hit, and the outer surface of the product cannot be
mechanically processed.
The correct installation method can avoid measurement errors. When installing the sensor,
please do the following:
First of all, ensure that the sensor mounting surface is completely close to the surface to be
measured. The surface to be measured should be as level as possible, and there should be
no included angles as shown in Figure A and Figure C. The correct installation method is
shown in Figure B and Figure D.
Secondly, the bottom line of the sensor and the axis of the measured object cannot
have an angle as shown in Figure E. When installing, keep the bottom line of the sensor
parallel or orthogonal to the axis of rotation of the measured object. This product can be
installed horizontally or vertically (vertical installation needs to be customized), and the
correct installation method is shown in Figure F.
Finally, the mounting surface of the sensor and the surface to be measured must be
tightly fixed, smooth in contact, and stable in rotation, and measurement errors due to
acceleration and vibration must be avoided.
the measured surface
uneven surface
generates the
angle
the measured surface
C
D
A
B
the measured surface
the measured surface
uneven surface
generates the
angle
+X
