BVM ®2015 8 Printed 10/8/2021
Installing the Horizontal Stabilizer
Remove the (4) 4mm bolts. The front bolts
are 30mm long and the rear bolts ar 25mm
long.
Use a 2mm Allen wrench and pliers to hold
the nut to disconnect the elevator pushrods
from the control horns.
Install the stabilizer by carefully routing the
pushrods through the openings.
NOTE: Secure the elevator servo
connection with a plastic clip or tape.
Apply a drop of Pacer Z-42 to the (4)
stabilizer bolts and secure the stab to the
fuselage with a 3mm Allen wrench.
Summary of Contents for GO FLY GOLD Grumman F-9F Cougar
Page 27: ...BVM 2015 27 Printed 10 8 2021...
