8
OPERATION
*Before operation read and follow all warnings, safety tips and assembly instructions.
1. Lubricate the cutting edge of the chisel with an anti-seize lubricant before each split is
attempted.
2. Place the BVA Nut Splitter over the but to be split. Orientate the BVA Nut Splitter in the
exact position as illustrated below. The BVA Nut Splitter should be parallel to the surface of the
flange, and the cutting chisel should be centered on the flat side of the nut being split. Refer to
the illustration below for proper alignment.
3. Pressurize the cylinder to extend the chisel slowly until the cutting edge makes
contact with the flat nut face. Verify that the cutting edge is centered on the flat
of the nut before continuing.
SFA Companies
10939 N. Pomona Ave. Kansas City, MO 64153
Tel: 888-332-6419
E-mail: [email protected]
