4
TM
8. Attach spinner protector #3016672 to spreader
frame as shown in Fig.8.
7. Attach shield #3015707 to trough bracket as
shown in Fig.7
Fig. 7
Fig. 9
Fig. 8
Fig. 10
9.
Attach spinner disk to gear motor shaft as shown
in Fig.9. Use upper hole in spinner disk. Secure disk
on shaft using clevis pin and cotter pin.
10.
Install lid #3015926 on to hopper. Place lid on
hopper. Bend hinges outward from center of the
hopper. Slide hinges openings on round protrusions of
the lid. Repeat this operation on opposite side of the
hopper. Secure lid on hopper using lynch pin.
To open lid from ether side of the hopper disengage
lynch pin, bend both hinges outwards and open lid.
11.
To prevent material loss during transportation discharge door #3016981 can be installed on trough opening.
Slide discharge door on trough tabs then secure it using lock pin #3016982 and cotter pin #1420016.
3016672
NUT 3/8-16
WASHER FLAT 3/8-16
SCREW 3/8-16 X 3.5
SCREW 3/8-16 X 1.0
WASHER FLAT 3/8
MUT NYLOCK 3/8-16
SHIELD #3015707
3010970
CLEVIS PIN 1420014
COTTER PIN FPC007800075
3015926
HINGE LID
