background image

www.buyersproducts.com

Phone (440) 974-8888

Fax 800-841-8003

12

3014972_D

WARRANTY

Buyers Products Co. warrants all truck/trailer hardware manufac-
tured or distributed by it, to be free from defects in material and 
workmanship for a period of one year from date of shipment. Parts 
must be properly installed and used under normal conditions. 
Any product which has been altered, including modification, mis-
use, accident or lack of maintenance will not be considered under  
warranty. Normal wear is excluded. The sole responsibility of Buyers 
Products Co. under this warranty is limited to repairing or replacing any 
part or parts which are returned, prepaid, and are found to be defective 
by Buyers Products Co. Authorization from Buyers Products Co. must 
be obtained before returning any part. No charges for transportation 
or labor performed on Buyers’ products will be allowed under this 
warranty.

Ratchet Tie-Down (P/N 5480010)

Optional Buyers Products ratchet tie-downs are 
available to use with your ladder rack.  These ratchet 
tie-downs will bolt directly to the gussets on all (4) 
legs, and can be used to secure equipment (no drilling 
is required).  The strap itself is 2” x 10’ in length and 
has a permanently attached s-hook.  It has a 1,000 lb 
working load limit and a 3,000 lb minimum breaking 
strength.

Window Screen (P/N 1501105)

The Buyers Products window screen is a perfect 
optional accessory to help protect the cab from the 
cargo in the bed of the truck. Constructed out of 15 
gauge CNC formed steel with a black powder coat 
finish.

Accessories:

Ratchet 

Tie-Down

Wind Deflector (P/N 1501193)

The universal fit wind deflector can be used in with 
Buyers Products ladder racks 1501100, 1501200, 
1501210 and 1501300 along with other similar ladder 
racks. The 40" black powder coated deflector installs 
quickly on most ladder racks.

Summary of Contents for 1501100













Reviews: