Getting Started
Charging your Jump Starter
1. Please use the provided Type C Cable to charge the product.(Charging adapter is
not included, 5V/2A or 9V/2A adapter is recommended )
2. Using a 9V/2A adaptor, it will take approximately 4 hours to fully charge the unit. In
order to extend the battery life it is recommended to fully charge the unit every 3 months.
Turn On your Jump Starter
Short press the power switch to boot the system, the battery indicator lights will turn
on. For energy saving, the system will turn to standby mode if there is no operation
within 20 seconds.
4 Modes LED Light
Long press the power switch more than 3 seconds to turn on the light mode. There
are 4 modes which are ON, SOS, Strobe, and Warning, simply short press the
power switch button to change the 4 modes or turn off the light mode. And you can
also press the power switch button for more than 3 seconds to turn off the light mode.
QC3.0 & 5V 2.4A Dual USB Output
This portable jump starter is also equipped with two smart USB outputs that provide
the fastest charging speed(USB1 - QC3.0:5V3A/9V2A/12V1.5A; USB2 - 5V2.4A) for
your portable electronic devices, such as phones,tablets, bluetooth earphones, etc
12V/10A EC5 Cigarette Lighter
Power your devices such as Air Compressor Pump, Car Vacuum Cleaner,etc. Just
plug the adapter into the EC5 Output port and connect the other end with the
device(up to 12V/10A)
EN
04
