7. Sawing
Before proceeding to your job, read "For
Safe Operation" section it is recommended to first
practice sawing easy logs. This also helps you get
accustomed to your unit.
Always follow all the safety regulations which can
restrict the use of the machine.
Always follow the safety regulations. The chain saw must only be used for cutting
wood. It is forbidden to cut other types of material. Vibrations and kickback vary with
different materials and the requirements of the safety regulations would not be
respected. Do not use the chain saw as a lever for lifting, moving or splitting objects.
Do not lock it over fixed stands. It is forbidden to hitch tools or applications to the
P.T.O. that are not specified by the manufacturer.
It is not necessary to force the saw into the cut. Apply only light pressure while
running the engine at full throttle.
It is recommended that daily inspection before use and after dropping or other
impacts to identify significant damage or defects.
Racing the engine with the chain seized in a cutaway can damage the clutch system.
When the saw chain is caught in the cut, do not attempt to pull it out by force, but
use a wedge or a lever to open the cut.
■
Guard against kickback
This saw is also equipped with a chain brake that
will stop the chain in the event of kickback if
operating properly. You must check the chain
brake operation before each usage by running the
saw at full throttle for 1 or 2 seconds and pushing
the front hand guard forward. The chain should stop
immediately with the engine at full speed. If the
chain is slow to stop or does no stop then replace
the brake band and clutch drum before use.
