28
EN
BÜTTNER ELEKTRONIK – MT iQ Solar
Pro
Important how to achieve the correct max solar
power:
Solar radiation on the modules should be at their
maximum. At this time the battery should NOT be
fully charged. In this case the solar regulator ope-
rates at reduced charge power and therefore solar
power can’t be stored at its maximum.
i
Adjustments
For the correct displaying of solar power bar graph it is
essential to store the maximum measured solar power
Entering setup menu:
Press
u
and hold for 5 seconds > Entering the menu. Menu
selection “Back” (quits menu) is now highlighted. Each
further key-press on
u
allows scrolling the menu. If no key
is pressed for 10 seconds, the menu will be quit again.
Calibrating the maximum solar power: RESET 100 %.
Advice
Change the menu to the function “Reset 100 %”. Keep
push-button
u
pressed until the progress bar reaches at the
end and “OK” is displayed. “Reset 100 %” completes the
calibration and the last adjustment is permanently stored.
Alternatively, you can also wait 10 seconds to store and quit.
