background image

- 27 - 

Technical Support

 

 
If you have questions about this product, or if you experience difficulties during the installation, 
contact Butternut at (330) 572-3200. 

 

For best service, please take a few minutes to review this manual before you call. 

 

Another great place for information about the classic Butternut

®

 Antennas is 

the Butternut

®

 IO Group - 

https://groups.io/g/butternut

  

This special interest group is moderated by Scott Myers, AC8DE and contains a treasure trove of 

Butternut

®

 antenna information from users around the world.

 

 
 
 

Warranty 

 
All products manufactured by Butternut

®

 are warranted to be free from defects in material and workmanship 

for a period of one (1) year from date of shipment. Butternut

®

’s sole obligation under these warranties shall be 

to issue credit, repair or replace any item or part thereof which is proved  to be other than as warranted; no 
allowance shall be made for any labor charges of Buyer for replacement of parts, adjustment or repairs, or any 
other work, unless such charges are authorized in advance by Butternut

®

.  If Butternut

®

 products are claimed 

to  be  defective  in  material  or  workmanship,  Butternut

®

  shall,  upon  prompt  notice  thereof,  issue  shipping 

instructions for return to Butternut

®

 (transportation-charges prepaid by Buyer). Every such claim for breach of 

these warranties shall be deemed to be waived by Buyer unless made in writing. The above warranties shall 
not extend to any products or parts thereof which have been subjected to any misuse or neglect, damaged by 
accident, rendered defective by reason of improper installation, damaged from severe weather including floods, 
or abnormal environmental conditions such as prolonged exposure to corrosives or power surges, or by the 
performance of repairs or alterations outside of our plant, and shall not apply to any goods or parts thereof 
furnished by Buyer or acquired from others at Buyer’s specifications. In addition, Butternut’s warranties do 
not  extend  to  other  equipment  and  parts  manufactured  by  others  except  to  the  extent  of  the  original 
manufacturer’s  warranty  to  Butternut

®

.    The  obligations  under  the  foregoing  warranties  are  limited  to  the 

precise terms  thereof.  These  warranties  provide  exclusive  remedies,  expressly  in  lieu  of  all  other  remedies 
including claims for special or consequential damages. SELLER NEITHER MAKES NOR ASSUMES ANY 
OTHER  WARRANTY  WHATSOEVER,  WHETHER  EXPRESS,  STATUTORY,  OR  IMPLIED, 
INCLUDING  WARRANTIES  OF  MERCHANTABILITY  AND  FITNESS,  AND  NO  PERSON  IS 
AUTHORIZED TO ASSUME FOR BUTTERNUT ANY OBLIGATION OR LIABILITY NOT STRICTLY 
IN ACCORDANCE WITH THE FOREGOING. 
 
©Butternut 2021 
 
Butternut

® 

is  a  trademark  of  PDS  Electronics,  Inc.  No  license  to  use  or  reproduce  any  trademarks  or  other 

trademarks  is  given  or  implied.  All  other  brands  and  product  names  are  the  trademarks  of  their  respective 
owners. 
 
 
Specifications subject to change without notice.             
 
Date Printed: 15 November 2021 

Summary of Contents for BUT-HF9V





























Reviews: