Butterfly B1501B/T, Operation And Service Manual

Page: 13 / 94

P a g e | 13
Butterfly B1501B/T - Single Head 15 Needle Embroidery Machine Manual
2.2.3 Left View
Head Left Side – View looking
to the left side of the
embroidery machine, shown in
Figure 2-3. Various motors are
shown on the left side of the
machine. The wiper motor
control the wipers which grab
the embroidery thread after
the thread is cut. The
reciprocator motor is what
controls the arm which grabs
the needle bar and moves it up
and down.
2.2.4 Right View
Head Right side – View looking
to the right side of the
embroidery machine, shown in
Figure 2-4. The color change
where is used to move the
head to the left or to the right
(to different needles). The
timing sight is a glass window
you can view the timing
numbers through (for setting
machine parameters during
maintenance). The timing
wheel moves the needle bar
through its cycles from 0 to 360
degrees. The laser light is used to highlight the needle plate hole or, the point at which the embroidery
machine needle makes penetration.
Figure 2-3: Left Side of Head
Figure 2-4: Right side of head