Butterfly B1201B, Manual

Page: 34 / 87

P a g e | 34
Butterfly B1201B/T - Single Head 12 Needle Embroidery Machine Manual
4. Press “ ” key to use the current embroidery parameter. Press “ ” key to return to
the “Select EMB. Pattern” page. Press others key to enter the “Edit EMB. PARA” page.
※
If you wish, you can use the 10 key to change any parameters. Use the direction keys “ ”
and “ ” to select different options, and press “ ” to modify them. When finished, press the “
” key to save the modified changes and return to main page.
Confirm Embroidery Design
Once the design is loaded into memory, you must confirm it to put the machine into embroidery
mode.
With the machine in “Preparation mode” “ ”, press “ ” key, until the screen shows:
“Confirm embroidering?”. Press “ ” key to enter embroidering mode (“ ” icon will turn
green, press the start button to start embroidering.
※
If current position of the machine is not at the origin point of the pattern (as set in “Frame
Origin Setting”), the system will ask: “Save current ORG setting for this pattern?”. Press “ ” and “
” key to select “Yes” or “No”, then press “ ” key to confirm.
※
If the current embroidery parameter is different from the saved one in the system, the
machine will ask: “Save current parameter setting for this pattern?”. Press “ ”, “ ” and “
” key, select “Yes” to save current embroidery parameter, or select “No” to not save.
※
If the system color sequence table is different from current color table, the machine will ask:
“Save color table?”, select “ Yes ” to save current color ‐ sequence table to this pattern or select “ No ” to
not save.