Butterfly B1201B, Manual

Page: 31 / 87

P a g e | 31
Butterfly B1201B/T - Single Head 12 Needle Embroidery Machine Manual
23
Network connection state
When on, indicates that the network is
connected
24
Control cable
When on, indicates that the system is
connected with direct connect cable
25
Current System Time
Time zone can be adjusted in “Machine
Parameter”.
Basic Control Panel Operations
Generally, there are very few operations needed to run the Butterfly embroidery machine. We
will simplify the learning process by only showing the Basic operations on the control panel in this
section and show further advanced (but rarely used) operation on another section.
Load design from USB / Memory stick
The first step to embroidering a design is to load it into the Butterflys control panel. You will
need to save your design from your PC onto a memory stick. The standard format is the Tajima DST
format. Please refer to your software manual on how to save the designs as DST.
Once the design is saved onto the stick:
1. Insert USB stick into the control panel then press “ ” key to enter “USB Disk Management” as
shown below.
2. Select “Input” then press “ ” key to confirm.
3. Use the keys “ ” and “ ” to select the pattern in memory you want, then press “ ” key
once the design is selected.