27
DD
KK
x 8
x 1
4
D
DD
x 3
x 3
x 6
DD
KK
x 8
x 1
5
B
DD
6
AA
BB
CC
AA
BB
CC
7
6.
Assemble the reflector onto the flame screen.
Screw the 3pcs stud on the flame screen, put
3pcs washer Φ6 onto the top of stud, then put
the reflector onto the stud, secure them with 3pcs
washer Φ6 and 3pcs wing nut.
Hardware Used
Wing nut
Washer Φ6
Stud
7.
Carefully install the glass tube by lifting up 7
and inserting through the center hole in the upper
plate. Ensure the black silicone ring is attached to
the lower edge of the glass tube as illustrated.
Slide the glass tube through the hole of the lower
plate cover and onto the middle plate. Check and
ensure that the glass tube is positioned properly
and is completely covering the center hole of the
middle plate.
WARNING!
The black silicone ring must be in
place prior to operating the heater.
To aid in installation
place black silicone
ring on the middle
plate and then install
glass tube.
Ensure the rim of the
glass tube sits firmly
in the black silicone
ring.
BLACK
SILICONE
RING
