26
●
While washing your unit makes sure to keep the area around the burner assembly dry at all times. If the
gas control is exposed to water in any way, DO NOT tries to use it. It must be replaced.
●
Burner and LPG compartment circulating air passageways of the appliance must be kept clean.
●
Airflow must be unobstructed. Keep controls, burner and circulation air passageways clean. Signs of pos-
sible blockage include:
●
Gas odor with extreme yellow tipping of flame / Appliance glow is excessively uneven / Appliance makes
popping noises.
●
Spiders and insects can nest in burner or orifices. This dangerous condition can damage the appliance
and render it unsafe for use. Clean burner holes by using a heavy duty pipe cleaner. Compressed air may
help clear away smaller particles.
●
Carbon deposits may create a fire hazard. If any carbon deposits develop, clean dome and engine with
warm soapy water.
●
After the burner and lava rocks are completely cooled down, remove it from the bowl and use a soft brush
to get rid of the mild stains, loose dirt and soil. Wipe with a soft cloth.
●
Clean the bowl and afterward put lava rocks again in proper position.
●
For proper cleaning, a vacuum cleaner can be used.
Note:
In a salt-air environment (such as near the sea), corrosion occurs more quickly than normal. Frequently
check the corroded areas and repair them promptly.
Stubborn stains, discoloration and possibly rust pit-
ting can occur from exposure to harsh outdoor conditions. Be careful not let any powder or solvent
come in contact with painted or plastic components as damage may occur.
After long use, some discoloration can come up and it screen is normal.
Make sure both gas supplies is in OFF position before changing battery. Please refer to the process of
assembling battery.
Please contact the Manufacturer or dealer for information regarding replacement hoses, thermocouples,
igniters, lava rocks, etc.
Attention: Never use unauthorized parts or component for this appliance. Use only original equipment
replacement spare parts and components.
Otherwise may void the warranty of this product and result in a hazardous condition.
STORAGE (after use)
Turn control knob in “OFF” position (full disk). Turn LPG cylinder in “OFF” position.
Store the appliance in a cool dry place away from direct sunlight; store it upright in an area sheltered from
direct contact with inclement weather (such as rain, sleet, hail, snow, dust and debris).
If desired, cover to protect exterior surfaces and to prevent build up in air passages.
Note: Wait until appliance is cool before covering. During periods of extended inactivity or when trans-
porting:
Turn control knob in “OFF” position (full disk).
Disconnect LPG cylinder and move to a secure, well ventilated location outdoors. DO NOT store in a loca-
tion that will exceed 50 °C.
Store appliance upright in an area sheltered from direct contact with inclement weather (such as rain,
sleet, hail, snow, dust and debris).
If desired, cover appliance to protect exterior surfaces and to prevent build up in air passages.
Note: Wait until appliance is cool before covering.
Manual ATRIO.indd 26
30/4/21 13:29
