7
When install camera please make sure there are not moving
objects in 3m area in front of PIR sensor, such as branches, leaves,
weeds, strings, color ribbon and other objects which may fluttered in
the wind to avoid potential false triggers. Please do not aim the
camera at a heat source such as boiler, exhaust vents and light, etc.
Avoid mistaking photos or videos.
3.3
IR LED
When shooting in night, the infrared light will be turned on to
fill light. 850nm and 940nm for selection, please confirm before
ordering. 940nm is invisible and the light is weak. 850nm is visible
and the light is strong.
3.4
Lock Buckle
Used to lock and turn on the camera.
3.5
Light Sensor
Used to sensitize the intensity of ambient light, and provide
parameters for reference. The photo resistor senses the light intensity
of camera position, and if there is a difference in light intensity
between the shooting position and the camera's mounting position,
adjust the ISO value for exposure to human intervention.
3.6
Lock Hole
Lock the camera with a small lock.
3.7
Indicator Light
There are red and blue indicator lights that indicate the
working status of the camera.
In “ON” Mode: camera starts successfully if red indicator
light flashes 6 times and then blue indicator light flashes 3 times
continually. The camera fails to start if blue indicator light keep
lighting, if start failed to shut down and start again.
On “TEST” mode, the red indicator light flashes one time at
every 10seconds. When PIR trigger, the blue indicator light flashes.
Low battery tips: In “ON” Mode, Red indicator light flashes
one time at every 1second for 60 seconds.
Upgrade Tip: Red and blue lights are flashing continuously
during the upgrade process.
