8
bushrangerpe.com.au
HEIGHT ADJUSTER POSITION
HEIGHT ADJUSTMENT TABLE
The Bushranger Lawn Mower has 11 height positions. Positions are
indicated by the holes in the Quadrant plate (A) with mesh with the
pin on the height adjuster leaver (B). Position
1
is a travel position
and must not be used for mowing. In this position the mower
blades are too low to cut grass and damage may result. Please
refer to the table below for more information.
Tip: Remember grass is a living plant and requires its leaves to
live. The leaves are what you cut and by cutting too low can result
in killing of your grass and a poor finish. This can also cause
premature wear and damage to your lawn mower.
B
A
RESULT DESIRED
HEIGHT ADJUSTER
POSITION
RESULT DESIRED
HEIGHT ADJUSTER
POSITION
1.5cm
1
4.5cm
7
2cm
2
5cm
8
2.5cm
3
5.5cm
9
3.5cm
4
6cm
10
3cm
5
6.5cm
11
4cm
6
1