10
bushrangerpe.com.au
Cleaning unit after each use will help prevent fire hazard from dry grass and extend the working life of the machine.
Protect the cutting components against corrosion by applying any good quality, commercial lubricant such as WD-
40 spray lubricant.
•
Wipe down the engine and outside of the machine with a damp cloth.
•
Keep blades in good condition. Replace if cutting performance deteriorates over time.
•
Replace blades and bolts as a full set only. This prevents vibration problems.
•
Replace blade disc if blade mount holes are worn or cracking is evident.
•
Always inspect wheel bearings for looseness or damage prior to each use replace when worn.
•
Always inspect machine for any loose, worn or broken components before starting the engine.
•
Replace engine oil at intervals as specified in the engine manual.
•
For aspects of servicing not covered by this Operators’ Manual, refer to an authorised Bushranger Service
Centre.
WARNING
Never operate this machine if the blades or blade disc are loose or damaged
!
SERVICING INFORMATION
WARNING
!
AVOID INJURY! Read and understand the entire safety
section before proceeding.
Caution: DO NOT touch parts which are HOT from
operation. ALWAYS allow parts to cool.
